logiPD-LDW Development Platform for Pedestrian Detection and Lane Departure Warning

The logiPD-LDW Development Platform for Pedestrian Detection and Lane Departure Warning enables designers to quickly start their new design. The toolset includes the reference FPGA designs with evaluation logicBRICKS IP cores, calibration and application software, as well as full documentation.

The hardware platform includes the Xilinx® Spartan®-6 FPGA SP605 Evaluation Kit with Xylon's add-on FMC board supporting camera connection, DVI I/O FMC board supporting DVI video inputs, OmniVision camera imager and Largan extreme FOV lense.

logiPD-LDW Setup with the Camera

The Xilinx FPGA SP605 Evaluation Kit includes an industry-standard FMC (FPGA Mezzanine Card) connector to enable expansions and customizations for specific applications. Xylon has designed the logiFMC-FPD-II 4-Channel FPD-Link II FMC daughter card for use in video development systems which require up to 4 camera connections. The supported camera interface is the National Semiconductor® FPD-Link II (Flat Panel Display Link).

Included OmniVision OV09715 1-megapixel camera sensor with an active array size of 1280x800 is specifically designed for advanced imaging applications. It is connected to the National FPD-Link II serializer board to enable LVDS cable connection with the Xylon FMC daughter card.

logiPD-LDW Setup wit the DVI I/O FMC

To enable an easier lab work the logiPD-LDW platform kit includes an Avnet DVI I/O board that enables work with movies taken from a real vehicle in different driving conditions.

Click to see Demo Video of Pedestrian Detection captured by this development kit!
Click to see Demo Video of Lane Departure Warning captured by this development kit!

Read More:

- Pedestrian Detection and Lane Departure Warning - Introduction
- The logiPD-LDW Development Platform Package
- Reference logicBRICKS Design for Pedestrian Detection
- Reference logicBRICKS Design for Rear Looking Lane Departure Warning
Copyright © 2017 Xylon d.o.o.